GenTL Producer for USB3 Vision Cameras

GenTL Producer for USB3 Vision Cameras (33U, 37U, 38U series)

This driver is required to access USB3 Vision cameras using the IC Imaging Control 4 SDK.

The GenTL Producer can also be used by third-party image processing or acquisition software, such as HALCON or MATLAB.

The package contains the GenTL .CTI file, a service executable for device adminstration and kernel driver.

	Released	Size	Type	Requirements
	September 30, 2024	14.7 MB		Windows 10 (x64), Windows 11 (x64), Ubuntu 20.04 or later The Imaging Source USB3 Vision camera (33U series, 37U series, 38U series)

Initial release for Linux x86_64 and aarch64

	Released	Size	Type	Requirements
	August 5, 2024	6.4 MB	MSI	Intel Core i3 or similar (AVX2 support recommended) 4GB RAM (dual-channel configuration recommended) Windows 10 (64-bit), Windows 11 (64-bit) The Imaging Source USB3 Vision camera (33U series, 37U series, 38U series)

Fix device enumeration sometimes not working after driver installation.

Executing UserSetLoad with UserSetSelector set to Default resets software properties to their default values.

Store software property values in device memory on UserSetSave if device supports driver storage.

Improve error message when open device fails due to a missing compatible driver.

	Released	Size	Type	Requirements
	July 2, 2024	6.3 MB	MSI	Intel Core i3 or similar (AVX2 support recommended) 4GB RAM (dual-channel configuration recommended) Windows 10 (64-bit), Windows 11 (64-bit) The Imaging Source USB3 Vision camera (33U series, 37U series, 38U series)

Initial non-beta release

Added support for STREAM_INFO_NUM_STARTED request.

Enhance range of driver-generated ColorTransformationValue.

	Released	Size	Type	Requirements
	March 20, 2024	6.1 MB	MSI	Intel Core i3 or similar (AVX2 support recommended) 4GB RAM (dual-channel configuration recommended) Windows 10 (64-bit), Windows 11 (64-bit) The Imaging Source USB3 Vision camera (33U series, 37U series, 38U series)

Add support for software properties on YUV formats

Add GenICam document caching

Add USB3Vision event support

Add support for kernel driver installation via IC4

Fix DeviceID changing unexpectedly

Fix Mathworks® MatLab™ compatibility

Fix memory leak in IC4 when using SnapSink

	Released	Size	Type	Requirements
	December 12, 2023	5.4 MB	MSI	Intel Core i3 or similar (AVX2 support recommended) 4GB RAM (dual-channel configuration recommended) Windows 10 (64-bit), Windows 11 (64-bit) The Imaging Source USB3 Vision camera (33U series, 37U series, 38U series)

Initial Preview Release.